Windows3.1 | Windows95 | Windows98 | WindowsME | Macintosh | E-Mail Us
Macintosh
HTML
A Guide to Beginning your own homepage.
FETCH
How do I set up FETCH to upload my own home page ?
Why does FETCH tell me that my login has failed ?
Why does my Macintosh keep adding file extensions to things I am uploading ?
Where can I find some more information on Fetch ?
NETSCAPE HELP
Why do I get system freezes or memory from Netscape ?
Where can I find more information on Netscape ?
MODEM HELP
How can I improve my connections ? ( Non-56k Modems )
How can I improve my connections ? ( 56k Modems Only )
GENERAL QUESTIONS
Where can I download Microsoft Internet Explorer for my Mac ?
Where can I find lots of general Mac info ?
Where can I find the official Apple support site ?
MODEM HELP
-
How can I improve my connections ? ( 56k Modems Only )
This page is ONLY for the advanced user. If you have any questions about this page, CLICK HERE.
USRobotic (Telepaths) Modems S32=98
| x2 on, V.90 off | x2 off, V.90 on | Both off | Both on* | |
| Sportster** | S32=66 | S32=34 | S32=98 | S32=2 |
| Courier | S58=32 | S58=1 | S58=33 | S58=0 |
To decrease the speed of the modem and disable 56k use the following string :
&F1&U1&N16S32=98
U1 = the floor connect speed at 2400 meaning the modem knows not to go lower than that.
N16 = the ceiling connect speed or the highest the modem will connect at as described below.
16= 33,600
8 = 14,400
3 = 2400 ** this is the lowest you can go - from this setting its line
noise.
* Using AT&F1 in the init string automatically enables both
protocols.
**Non-U.S. Robotics modems that use x2 generally use the same commands
as the Sportster
Rockwell
+MS=11,1
~Bocca
~Nobel Links
~Creative Modem Blaster V90 D15635
~DSI d-f-v V.90 DI 3635
~Modem Blaster Flash 56 II
| V.90 preferred (K56flex will still work)* | +MS=12,1 |
| V.90 only, K56flex and V.34 disabled* | +MS=12,1,34667,56000 |
| K56flex preferred (V.90 will still work)* | +MS=56,1 |
| K56flex only, V.90 and V.34 disabled* | +MS=56,1,34000,56000 |
| Disable V.90 and K56flex, use V.34 (28.8/33.6) | +MS=11,1 |
Rockwell HCF
+MS=V34
~Supra Max 56k** (AT&FW2+MS=V34
for this modem this is the string)
~Cirrus CLM data/fax/voice V90
~MPD 3858-u
~Rockwell V90 DSL 56k data/fax PCI Modem
~56k Internet Fax (only from Gateway)
~WIN5602 Voice Modem (from Tiger Direct - you get these thru
FingerHut)
| V.90 preferred (K56flex will still work) | +MS=V90 |
| K56flex preferred (V.90 will still work) | +MS=K56FLEX |
| Disable V.90 and K56flex, use V.34 (28.8/33.6) | +MS=V34 |
To decrease the speed of the modem and disable 56k use the following string :
+MS=V34,0,2400,X
*** X = the ceiling or highest connect
speed. Insert your own speed here -
example - 33600 or 28800 or 14400 or 2400
LT (win modems){Lucent Technologies} S38=0-V90=0
~Telepath 56k Modems (usually from Gateway)
~Compaq 56k - DF
~Toshiba internal V90 modem
~V90 PCI Windows Modem (LHT)
~ActionTec PCI 56k Modem (chipset is a Lucent Venus, so the string is S38=0S109=0)
~ZOOM 56K PCI
~MDP7800 V-U Modem
~Viking WinModem
| Enable V.90 | -V90=1 |
| Disable V.90 | -V90=0 |
| See current -V90 setting with explanation | -V90? in a terminal |
| Enable K56flex | S38=1 |
| Disable K56flex | S38=0 |
For PC-TELL chipsets S37=12
~HSP MicroModem 56
~HSP Audio Modem Riser
~MSP5900 - U Modem
| V90 and K56Flex off (V34) | S37=12 |
For Venus chipsets (mostly used in external modems): S109=0 /or/ S109=2
OR
s109=0s37=19s38=0
| K56flex only (V.90 disabled) | S109=0 |
| K56flex or V.90* | S109=1 |
| V.90 only (K56Flex disabled) | S109=2 |
The Motorola SM 56k modem is an HSP
based modem.
| Disable v.90 | at*mm15 |
| K56Flex |